top of page

CLEANING KNOWLEDGE

CLEANING KNOWLEDGE EXPLAINED SIMPLY

Expert knowledge from professional building cleaning – explained in questions and answers by OSKA Facility Service from Gelsenkirchen.

OSKA Facility Service – Team für Gebäudereinigung

✓ Rückmeldung in einem Werktag ✓ Fester Ansprechpartner ✓ Kostenlose Besichtigung

Noch Fragen? Rufen Sie uns an oder schreiben Sie uns.

Choose language:  Deutsch · Shqip · English · Türkçe · Polski · Română · Български · Українська · Русский · Bosanski / Hrvatski / Srpski · Kurdî (Kurmancî) · العربية · فارسی

Our cleaning knowledge is available in 13 languages – this way we can also train our team in their native language.

Edit this paragraph to add any content you would iike to share about your company or service.

COLOURS & HYGIENE

Edit this paragraph to add any content you would iike to share about your company or service.

+  What is the four-colour system – and what is it for?

A standard in professional cleaning: each area is assigned a fixed colour for cloths, buckets and gloves. This prevents dirt and germs from being carried from one area to another – and everyone on the team can recognise the separation at a glance.

+  What does the colour red stand for in the four-colour system?

For toilet bowls, urinals and their immediate surroundings – the area with the highest hygiene risk. Red cloths are used exclusively there, never on washbasins, furniture or in the kitchen.

+  What does the colour yellow stand for?

For the rest of the sanitary area: washbasins, taps and fittings, tiles, mirrors, showers, as well as soap and paper dispensers.

+  What does the colour blue stand for?

For offices, break rooms and circulation areas: desks, furniture, doors, window sills, radiators and other surfaces outside the sanitary and kitchen areas.

+  What does the colour green stand for?

For kitchens, kitchenettes and areas where food is handled. In some facilities, for example in healthcare, the colours are assigned differently – in that case, the hygiene plan of the site is decisive.

+  Does the colour only apply to the cloth?

No. The colour also applies to buckets, sponges and gloves. Only when all the equipment for an area has the same colour does the separation work reliably.

+  What is meant by cross-contamination?

The transfer of dirt and microorganisms from heavily soiled surfaces to clean ones – via cloths, gloves, equipment or hands. The colour system, changing cloths and the correct order of work are the most important means of preventing it.

+  Why must a used cloth not go back into the cleaning solution?

Because otherwise the dirt gets into the solution and is spread again with the next wipe. That is why you work with several prepared cloths: a fresh cloth for each surface or room, and used cloths go into a separate container for laundering.

+  What is the difference between cleaning and disinfection?

Cleaning removes dirt from surfaces. Disinfection specifically reduces the number of pathogens – with tested products, in the correct concentration and with the prescribed contact time. It is used where it is necessary, for example in medical practices, and does not replace cleaning.

CLEANING AGENTS

Edit this paragraph to add any content you would iike to share about your company or service.

+  Which four factors determine every cleaning result?

Sinner's Circle, described in 1959 by Herbert Sinner: Chemistry: the cleaning agent Mechanical action: wiping, brushing, machine Temperature: water or working temperature Time: the contact time

+  What happens if you reduce one factor of Sinner's Circle?

Then the other factors must increase so that the result stays the same. Anyone who wants to work with less chemistry needs more mechanical action, more contact time or a higher temperature.

+  What does the pH value of a cleaner indicate?

Whether a product is acidic, neutral or alkaline – on a scale from 0 to 14. Below 7 is acidic, around 7 neutral, above 7 alkaline. The further the value is from 7, the stronger the product – and the more carefully it must be handled.

+  When do you use an acidic cleaner?

Against mineral soiling such as limescale, urine scale and rust – typical in sanitary areas. Not suitable for calcareous natural stone such as marble; cement-based grout can also be attacked.

+  When do you use an alkaline cleaner?

Against organic soiling such as grease, oil and protein – for example in kitchens – as well as for the deep cleaning of floors. Sensitive floor coverings such as linoleum do not tolerate strongly alkaline products.

+  What is a neutral cleaner used for?

For daily maintenance cleaning. Neutral cleaners are gentle on materials and suitable for most surfaces and floors.

+  What are surfactants?

The active washing ingredients of a cleaner. They lower the surface tension of water, loosen dirt from the surface and keep it suspended in the water so that it can be wiped away.

+  What does contact time mean?

The time a product must remain on the surface before it takes effect. Wiping too early wastes the effect – which is why the contact time is part of every correct application.

+  Why must cleaning agents not be mixed?

Because dangerous reactions can occur. A classic example: chlorine-based products and acidic cleaners together release toxic chlorine gas. Each product is used on its own and only for its intended purpose.

+  Why is the correct dosage so important?

Too much product leaves residues, streaks and sticky floors that get dirty again more quickly – and costs money unnecessarily. Too little does not clean thoroughly. That is why dosing is always done according to the manufacturer's instructions.

+  What does the safety data sheet contain?

All safety-relevant information on a product in 16 fixed sections – including hazards, protective measures, first aid, storage and disposal. It is provided by the manufacturer and must be available for every hazardous substance product.

+  Why should cleaners only be kept in labelled containers?

So that there are no mix-ups. A product decanted into an unlabelled bottle can be used incorrectly, mixed or even drunk.

WORKING TECHNIQUES & FLOORS

Edit this paragraph to add any content you would iike to share about your company or service.

+  In what order do you clean a room?

According to four basic rules: From top to bottom – falling dust lands on surfaces not yet cleaned From clean to dirty – toilets and urinals come last Dry before wet – first waste and dust, then damp or wet From the back towards the door – so that nobody walks over freshly cleaned surfaces

+  What is the difference between maintenance, interim and deep cleaning?

Maintenance cleaning is regular cleaning on a fixed schedule. Interim cleaning goes deeper, for example when stubborn dirt has built up on floors. Deep cleaning removes all soiling and old protective layers down to the floor covering.

+  What is spot cleaning?

Only visible dirt is removed – for example stains, crumbs or fingerprints. It supplements maintenance cleaning when not everything has to be fully cleaned every day.

+  What is the difference between damp mopping and wet mopping?

Damp mopping picks up loose dust and dirt with a mop that is only slightly damp – quickly and without leaving floors wet. Wet mopping also loosens adhering dirt using more water and cleaning agent.

+  What does a scrubber-dryer do?

It applies cleaning solution, scrubs the floor with brushes or pads and immediately vacuums up the dirty water. This way, large areas are cleaned in a single pass and are dry again quickly.

+  What is a floor finish (protective coating) – and why is it applied?

After deep cleaning, a protective film is applied to some floors. It protects the floor covering from wear, makes daily cleaning easier and gives the floor an even appearance.

+  What do you need to look out for with natural stone?

Calcareous stones such as marble, limestone or Solnhofen slabs are sensitive to acid. Only cleaners suitable for them are used here – never acidic sanitary cleaners or descalers.

+  How do you clean glass without streaks?

With a small amount of cleaning agent, a strip washer and a squeegee, in even strokes from top to bottom. The edges are then wiped with a dry cloth.

+  Why are microfibre cloths used?

Microfibres pick up dust and dirt particularly well. As a result, you can often manage with less cleaning agent. It is important that the cloths are washed properly after each use.

+  How do you mop a floor correctly?

In S-shaped or figure-of-eight movements, working backwards towards the door. The mop pushes the dirt ahead of it instead of spreading it. Edges and corners are done first, then the open area.

+  What does typical office maintenance cleaning include?

Emptying waste paper baskets and bins, cleaning work surfaces and furniture where clear, wiping doors and handles, vacuuming or mopping floors, cleaning the kitchenette and sanitary rooms, and refilling consumables. The exact scope is defined for each site.

+  How often should each area be cleaned?

That depends on how it is used. Sanitary and kitchen areas are usually cleaned daily, offices daily to weekly depending on use, and glass surfaces at longer intervals. The right schedule is best determined during a site visit.

FLOOR COVERINGS & CARE

Edit this paragraph to add any content you would iike to share about your company or service.

+  Why do you need to know the floor covering before cleaning?

Every floor covering tolerates different products and different amounts of water. The wrong cleaner can make surfaces dull, discolour them or damage them permanently. The manufacturer's care instructions are always decisive.

+  How do you clean linoleum correctly?

With a neutral cleaner or special linoleum cleaners and as little water as possible. Strongly alkaline products and standing water damage the floor covering.

+  What should be considered with PVC and vinyl floors?

They are robust and are usually mopped with a neutral cleaner. Solvent-based products can attack the surface. A floor finish (protective coating) protects against wear.

+  How do you clean tiles and porcelain stoneware?

Glazed tiles are easy to care for. Matt or slip-resistant porcelain stoneware holds dirt in its rough surface – suitable cleaners and machine cleaning help here. When using acidic products, protect the grout.

+  May parquet be wet-mopped?

No. Wood swells with too much water. Parquet and wooden floors are only wiped with a barely damp mop – using products suitable for wood.

+  How do you care for carpeting?

Vacuum thoroughly on a regular basis, treat stains as soon as possible and deep-clean the carpet at longer intervals, for example using spray extraction.

+  What are entrance matting zones for?

A large proportion of dirt is carried into the building on shoes. Sufficiently long dirt-trapping mats at the entrance hold it back – this protects the floors and reduces the cleaning effort.

OCCUPATIONAL SAFETY

Edit this paragraph to add any content you would iike to share about your company or service.

+  Why is a warning sign put up during wet cleaning?

Freshly mopped floors are slippery. The “Caution: slippery floor” sign warns everyone entering the area and is part of every wet cleaning job.

+  What protective equipment do you need for cleaning?

Depending on the product and the task, above all suitable protective gloves, safety goggles where there is a risk of splashing, and non-slip shoes. What is required in each individual case is stated in the operating instructions and the safety data sheet.

+  What are operating instructions (Betriebsanweisung)?

Easy-to-understand instructions for the workplace: what hazards a product has, how to protect yourself, what to do in an emergency and how to dispose of it. They are mandatory for hazardous substances (§ 14 Gefahrstoffverordnung [German Hazardous Substances Ordinance]).

+  What should you do if cleaning agent splashes into your eye?

Rinse immediately with plenty of clean water for several minutes while holding the eyelid open, then follow the first aid information in the safety data sheet and seek medical help.

+  Why is skin protection so important in cleaning?

Frequent contact with water and cleaning agents puts a heavy strain on the skin. Gloves, skin protection before work and skin care afterwards help to prevent skin problems.

+  Why should you never stand on chairs or tables when cleaning?

Because they can slip or tip over. For work at height, there are tested step stools and ladders – or telescopic poles that allow you to work from the floor.

YOUR QUESTION IS NOT LISTED?

We will get back to you within one working day – by phone, WhatsApp or email.

0151 219 056 37 · Message us on WhatsApp · info@oska-fs.de · Mon–Fri 9 am–6 pm

To the customer questions · Kontakt

bottom of page